|
Intel Server
Case SC5400BASE (SKU 48913) Configuration Guide |
 |
Main
Features:
- Intel entry level full
tower black server case with locking front bezel
- Six tool-less fixed-drive
bays upgradeable to maximum 6 hot-swap drives (SAS or SATA)
- 670W
Fixed Server Power Supply
- Two chassis fans (120mm
and 80mm)
- Convertible to 5U
rackmount with optional kit
|
|
| The
Intel® Server Chassis SC5400 is a reliable, scalable, and manageable
chassis with the versatility to support applications ranging from
multipurpose servers in small businesses to workgroup database servers
and departmental exchange servers. The Server Chassis SC5400 delivers
the power and thermal headroom to support the new Dual-Core Intel® Xeon®
Processor-Based Servers. |
| Compatible
Motherboards |
|
Specifically designed and validated for
the following Intel® Server Boards:
|
| Rackmount
Option |
| Rack
Conversion Kit to 5U SKU# 29936 (ARIGRACK) - rails included |
| Hot-swap
Bay Options* |
|
SKU |
Intel Part # |
Description |
Integration Notes |
|
48941 |
AXX6DRV3G
|
6-drive SAS/SATA
Non-Expander
(use primarily with
SATA controllers)
|
Requires 6 SAS or SATA ports from RAID card
to support all six drives bays (3.5"). Use primarily with SATA
controllers (on motherboard or card).
Includes: Backplane board, 6 drive carriers, 6 data cables,
6-drive bay, IPMB cable, SES cable and SGPIO cable, common
installation guide, SATA/SAS configuration label. |
|
48939 |
AXX6DRV3GEXP |
6-drive SAS/SATA
Expander
(use with SAS
controllers only to support all six drive bays) |
Requires 2 SAS ports from baseboard, ROMB card or
RAID card & is compatible with SAS or SATA 3.5" hard drives.
Includes: backplane board, 6 drive carriers, 2 Data cables,
6-drive bay, IPMB cable, common installation guide, SATA/SAS
configuration label. |
|
|
* Six drive maximum. While it is physically possible to add
the 4-bay units as well but it not recommend or supported by Intel on
the SC5400 base |
|
Processor Support |
 All
SC5400 cases use a processor air duct thermal solution.
This is a large piece of plastic that
will fit over the CPU area. Therefore you will use a Xeon CPU with a 2U
PASSIVE heatsink (metal heatsink without attached fan - see picture to
right). You can tell when ordering the CPU by looking at the Intel Part
Number, it will end in "P" (example BX805555030P). |
|
Optional Accessories |
|
Local control panel option
AXXLCPPED = ASI SKU 30631
(fits in unused 5.25" drive bay) . Does NOT require IMM when used with
Bensley platform because full BMC is integrated to server board. |
Floppy: All new Intel server board DO
NOT have a standard 34-pin floppy connector. Therefore to add floppy
drive you will need two parts:
- AXXUSBFLOPPY INTERNAL SLIM-LIM
FLOPPY KIT (includes drive) = SKU 50003
- AXXCDUSBFDBRK 5.25" slim-line
CD/DVD/Floppy bracket KIT = SKU 49016
This will also allow you to add one SLIM
optical drive - for example SKU 50831 (AXXDVDROM). However any
brand slim optical drive is supported |
|
AXXRMM Remote Management Module = SKU
50002 (Not supported in S5000XVN workstation board family) |
|
|
|
|
|
